Question: What Type Of GFCI Outlet Do I Need?

What are the different types of GFCI?

Three types of GFCIs are commonly used in homes – the GFCI outlet, the GFI circuit breaker and the portable GFCI.

All of these GFCIs perform the same function but each has different applications and limitations..

What is the difference between a 15 amp and 20-amp GFCI?

20-amp circuits are designed for a heavier load of electrical current than 15-amp circuit breakers. For commercial and industrial power distribution, the circuit breakers will have a higher amperage.

Can I use 14 gauge wire on a 20 amp circuit?

You can not use 14 AWG anywhere on a circuit that has a 20A breaker. If you are putting 15 amp receptacles on a 20 amp circuit with 12 gauge wire, then you MUST use the screw terminals, not the back stab terminals. … Just use the side terminals.

What happens when you put a 20 amp receptacle on a 15 amp circuit?

If your question is “can I connect a receptacle rated for 20 amps to a circuit designed for 15 amps?”, the answer is yes, because the receptacle can handle more current than the circuit is rated for. If you exceed 15 amps, the breaker will blow, and protect the receptacle.

How many outlets can be on a 20 amp circuit?

10 receptaclesOne rule of thumb is to assign a maximum draw of 1.5 amps to each receptacle, which allows for 10 receptacles on a 20-amp circuit.

Are all GFCI outlets the same?

There is no difference. Ground fault circuit interrupters (GFCI) and ground fault interrupters (GFI) are the exact same device under slightly different names. Though GFCI is more commonly used than GFI, the terms are interchangeable.

How many outlets can be on a 15 amp breaker?

8 outletsTechnically, you can have as many outlets on a 15 amp circuit breaker as you want. However, a good rule of thumb is 1 outlet per 1.5 amps, up to 80% of the capacity of the circuit breaker. Therefore, we would suggest a maximum of 8 outlets for a 15 amp circuit.

Can you put a freezer and refrigerator on the same circuit?

A refrigerator and freezer shouldn’t be on the same circuit. Appliances like these use a lot of power intermittently, and putting too much strain on one circuit can cause frequent cooling issues, food waste, or even surges in your home.

What is code for outlets in kitchens?

In kitchens, electrical outlets should be placed no farther than 48 inches apart, so that no point on the countertop is more than 24 inches away from a receptacle. Any countertop 12 inches wide or more should have an outlet on the wall behind the countertop.

Should I get a 15 or 20-amp GFCI outlet?

1) You can have a GFI receptacle on either a 15 or 20A circuit. Keep in mind, areas like kitchens, bathrooms, laundry, etc, typically require 20A circuits for receptacles. For areas like outside and garages 20A circuits are always a good idea.

Which location is not required to be GFCI protected?

GFCI protection is not required for receptacles that are not readily accessible, such as a ceiling-mounted receptacle for a garage door opener. Nor are they required for a receptacle on a dedicated branch circuit located and identified for a cord-and-plug-connected appliance, such as a refrigerator or freezer.

Is there a difference between indoor and outdoor GFCI?

Outdoor electrical outlets differ from indoor outlets because they have watertight covers that protect the outlet even with a cord plugged in. … GFCI outlets trip and turn off automatically when there’s a current leakage or short circuit, which helps prevent fires and accidental shocks.

Do all outlets in kitchen need to be GFCI?

Kitchens: All receptacles serving countertop areas and any receptacle within 6 feet of a sink must have GFCI protection. … Laundry, utility, and wet bar sinks: Where receptacles are placed within 6 feet of the outside edge of the sink, they require GFCI protection.

Can I put a GFCI anywhere in a circuit?

You can replace almost any electrical outlet with a GFCI outlet. Correctly wired GFCIs will also protect other outlets on the same circuit. While it’s common to find GFCI outlets in bathrooms and kitchens, there are GFCI outlet requirements.

How many outlets can one GFCI protect?

There’s no limit. A standard GFCI will protect up to 20 amps, drawn from any combination of receptacles, either the built-in one or any number of additional ones connected to its load terminals.

Should bathroom outlets be 15 or 20 amp?

The minimum requirement for outlet receptacles in a bathroom is one GFCI-protected receptacle served by a 20-amp circuit. This is a bare minimum, however, and most bathrooms will have at least two receptacles, and often as many of four or five.

What is the primary function of a GFCI?

The ground-fault circuit interrupter, or GFCI, is a fast-acting circuit breaker designed to shut off electric power in the event of a ground-fault within as little as 1/40 of a second. It works by comparing the amount of current going to and returning from equipment along the circuit conductors.

How far can you run 12 gauge wire on a 20 amp circuit?

The total circuit would be about 60 -70 feet in length. It would only be supplying about 5 outlets and one light. It would be a light load, running small things, no heaters or med/large equipment. #12 provides reasonable performance up to about 100′ with general loads like you describe.

Can you have 2 GFCI outlets on the same circuit?

To save money, you can put in a single GFCI and then wire additional standard outlets to the “LOAD” output from the single GFCI. … This provides the same protection as having a GFCI at each location.

Should a refrigerator be on a 20 amp circuit?

Refrigerator Circuit A modern refrigerator requires a dedicated 20-amp, 120/125-volt circuit. You may currently have a smaller refrigerator plugged into a general lighting circuit, but during any major remodeling, a dedicated 120/125-volt circuit for the refrigerator should be installed.

Do I need 20 amp outlets in kitchen?

Kitchens, by code, are required to have at least two 20 amp, 120-volt circuits to be installed on every kitchen countertop. The main reason for this is so the outlet can handle enough amps to power simple kitchen cookware such as microwave ovens, toasters, and blenders.