Quick Answer: What Is The Difference Between A 15 Amp And 20-Amp GFCI?

Should a refrigerator be on a 20 amp circuit?

Refrigerator Circuit A modern refrigerator requires a dedicated 20-amp, 120/125-volt circuit.

You may currently have a smaller refrigerator plugged into a general lighting circuit, but during any major remodeling, a dedicated 120/125-volt circuit for the refrigerator should be installed..

How many outlets can I put on a 20 amp kitchen circuit?

two outletsKitchens must have at least two outlets of 20-amps. The outlets in the kitchen are required to power very high voltage kitchen appliances. A 20-amp circuit is used to power appliances like microwave ovens, toasters, as well as blenders.

How many outlets can be on a 20 amp circuit?

10 receptaclesOne rule of thumb is to assign a maximum draw of 1.5 amps to each receptacle, which allows for 10 receptacles on a 20-amp circuit.

Can you plug a 20 amp appliance into a 15 amp outlet?

Electrical plugs designated as 20-amp will not fit into 15-amp outlets. … A 20-amp circuit, protected by a 20-amp breaker or fuse, must be served by 12-gauge or 10-gauge wire.

Can I use 12 gauge wire on a 15 amp circuit?

Because it’s thinner and lighter, 14-gauge wire is easier to run than 12-gauge wire. However, 12-gauge wire is acceptable on both 15- and 20-amp circuits, so some electricians use it exclusively when wiring a house.

What happens when you put a 20 amp receptacle on a 15 amp circuit?

If your question is “can I connect a receptacle rated for 20 amps to a circuit designed for 15 amps?”, the answer is yes, because the receptacle can handle more current than the circuit is rated for. If you exceed 15 amps, the breaker will blow, and protect the receptacle.

Do I need 20 amp outlets in kitchen?

Kitchens, by code, are required to have at least two 20 amp, 120-volt circuits to be installed on every kitchen countertop. The main reason for this is so the outlet can handle enough amps to power simple kitchen cookware such as microwave ovens, toasters, and blenders.

Should bathroom outlets be 15 or 20 amp?

The minimum requirement for outlet receptacles in a bathroom is one GFCI-protected receptacle served by a 20-amp circuit. This is a bare minimum, however, and most bathrooms will have at least two receptacles, and often as many of four or five.

Can you use 14 gauge wire on a 20 amp breaker?

You can not use 14 AWG anywhere on a circuit that has a 20A breaker. If you are putting 15 amp receptacles on a 20 amp circuit with 12 gauge wire, then you MUST use the screw terminals, not the back stab terminals. … Just use the side terminals.

How far can you run 12 gauge wire on a 20 amp circuit?

The total circuit would be about 60 -70 feet in length. It would only be supplying about 5 outlets and one light. It would be a light load, running small things, no heaters or med/large equipment. #12 provides reasonable performance up to about 100′ with general loads like you describe.

How many outlets can you put on a 15 amp breaker?

8 outletsTechnically, you can have as many outlets on a 15 amp circuit breaker as you want. However, a good rule of thumb is 1 outlet per 1.5 amps, up to 80% of the capacity of the circuit breaker. Therefore, we would suggest a maximum of 8 outlets for a 15 amp circuit.

How do I know if I need a 15 or 20 amp GFCI?

Look at your outlet. If the two slots are parallel, it is a 15 amp outlet. If one slot is ‘T’ shaped and the other is straight, it is a 20 amp outlet that will also accept 15 amp plugs. If the two slots are perpendicular the outlet is 20 amp only.

When should I use 15 amp vs 20 amp?

Standard 15-amp receptacles are suitable for typical household appliances, lamps and other accessories. A 20-amp receptacle is for heavy-duty appliances and power tools, such as air compressors. Residential garages occasionally have 20-amp receptacles to accommodate larger power tools.