What Appliances Require A 20 Amp Circuit?

What uses a 20 amp outlet?

A 20-amp receptacle is for heavy-duty appliances and power tools, such as air compressors.

Residential garages occasionally have 20-amp receptacles to accommodate larger power tools.

The term “amp” is short for “ampere.”.

Can you plug a 15 amp appliance into a 20 amp outlet?

You are allowed to use a 15 amp rated outlet on a 20 amp circuit simply because it is expected that the cord that’s plugged into the outlet should not exceed 15 amps (by code). … Appliances which draw > 15 amps should have a 20 amp or higher cord and plug.

Can the outlets in a bathroom be on the same circuit as the lights?

The main rule in 210.11(C)(3) states that the branch circuit provided to supply the bathroom receptacle outlet(s) shall have no other outlets. No lighting outlets or other equipment can be fed from the same circuit feeding the bathroom receptacles.

How many appliances can be on a 20 amp circuit?

One rule of thumb is to assign a maximum draw of 1.5 amps to each receptacle, which allows for 10 receptacles on a 20-amp circuit.

Do all kitchen outlets require 20 amps?

Kitchens, by code, are required to have at least two 20 amp, 120-volt circuits to be installed on every kitchen countertop. The main reason for this is so the outlet can handle enough amps to power simple kitchen cookware such as microwave ovens, toasters, and blenders.

What appliances need a dedicated circuit?

Appliances that need a dedicated circuit include:Electric ranges.Wall ovens.Refrigerators.Large Microwaves.Freezers.Dishwashers.Garbage disposals.Toaster ovens.More items…

What happens if you put a 15 amp outlet on a 20 amp circuit?

Receptacles rated higher than the circuit rating may not be used, so 20 amp receptacles are not permitted on a 15 amp circuit. One 15 Amp receptacle on a 20 Amp circuit is a no-no. Thanks Dave, that helps.

Should I get a 15 or 20 amp GFCI outlet?

1) You can have a GFI receptacle on either a 15 or 20A circuit. Keep in mind, areas like kitchens, bathrooms, laundry, etc, typically require 20A circuits for receptacles. For areas like outside and garages 20A circuits are always a good idea.

How far can you run 12 gauge wire on a 20 amp circuit?

The total circuit would be about 60 -70 feet in length. It would only be supplying about 5 outlets and one light. It would be a light load, running small things, no heaters or med/large equipment. #12 provides reasonable performance up to about 100′ with general loads like you describe.

Can I run two refrigerators on the same circuit?

But if one of the refrigerators has trouble starting, it may draw more current for an extend period of time, and if the other refrigerator starts at the same time, it could end up tripping the breaker. It’s a long shot, but it does happen. So, the short answer is, yes, you technically can.

Can you use 14 gauge wire on a 20 amp breaker?

You can not use 14 AWG anywhere on a circuit that has a 20A breaker. If you are putting 15 amp receptacles on a 20 amp circuit with 12 gauge wire, then you MUST use the screw terminals, not the back stab terminals. … Just use the side terminals.

What happens when you put a 20 amp receptacle on a 15 amp circuit?

If your question is “can I connect a receptacle rated for 20 amps to a circuit designed for 15 amps?”, the answer is yes, because the receptacle can handle more current than the circuit is rated for. If you exceed 15 amps, the breaker will blow, and protect the receptacle.

How many outlets can one GFCI protect?

There’s no limit. A standard GFCI will protect up to 20 amps, drawn from any combination of receptacles, either the built-in one or any number of additional ones connected to its load terminals.

How many outlets can I put on a 20-amp kitchen circuit?

two outletsKitchens must have at least two outlets of 20-amps. The outlets in the kitchen are required to power very high voltage kitchen appliances. A 20-amp circuit is used to power appliances like microwave ovens, toasters, as well as blenders.

Can you put a freezer and refrigerator on the same circuit?

A refrigerator and freezer shouldn’t be on the same circuit. Appliances like these use a lot of power intermittently, and putting too much strain on one circuit can cause frequent cooling issues, food waste, or even surges in your home.

How many outlets can be on a 15 amp breaker?

10 outletsGenerally, homes have eight to 10 outlets on a 15 amp breaker but not all are used at the same time. Lights and outlets are normally wired on separate branch circuits, which means that the lights will be protected by a separate circuit breaker to the one which protects the outlets.

Can I run 2 refrigerators on the same circuit?

Yes you could do that, be aware though that fridges and freezers are cooled by compressors. … So yes two seperate 20 Amp GFCI protected receptacles one dedicated to the freezer the other for the fridge, both separately wired to their own 20 Amp breaker.

Should bathroom outlets be 15 or 20 amp?

The minimum requirement for outlet receptacles in a bathroom is one GFCI-protected receptacle served by a 20-amp circuit. This is a bare minimum, however, and most bathrooms will have at least two receptacles, and often as many of four or five.